35FT HOUSE BOATS TECHNICAL PARAMETER

Technical Specification

35FOOT BOAT HOUSE FEATURES

1. Luxury space on the water

37㎡ intelligent layout: living room, bedroom, kitchen, bathroom integrated design, comparable to land villas.

Panoramic view: large viewing window + open deck, 270° panoramic experience.

High-rise design: internal height 2.4 meters, no sense of oppression, free movement.

2. Military-grade floating bridge system

Fiberglass floating bridge: vacuum adsorption process, impact resistance and corrosion resistance, life span of more than 20 years.

Super stable buoyancy: optimized fluid mechanics design, wave resistance increased by 30%.

Shallow water adaptation: floating bridge height 1.3 meters, easy to moor near the shore and shallows.

3. Green and smart upgrade

Solar power supply: optional off-grid energy system, environmental protection and worry-free battery life.

Smart home: integrated air conditioning, water purification, security system, full of technology.

4. Technical highlights

Modular structure: fast disassembly and transportation, suitable for deployment in global waters.

Silent design: low-noise motor + soundproof cabin, enjoy a quiet life.

Weather resistance: no fear of ultraviolet rays, salt spray corrosion, suitable for all seasons.

35FOOT BOAT HOUSES STANDARD AND OPTIONAL CONFIGURATIONS

Core structure configuration

1. Steel frame

Hot-dip galvanized square tube welding, surface fluorocarbon paint spraying, anti-rust and anti-corrosion.

2. Roof design

PVC corrugated tile roof, lightweight, waterproof and durable.

Floating bridge process.

Fiberglass floating bridge 1/4 simple negative mold molding, one-piece molding with high precision.

Living space decoration

1. Walls and doors and windows

Aluminum alloy sliding door + bridge aluminum glass window (built-in manual blinds).

Non-glass surface: weather-resistant wallboard + insulation interlayer + interior decorative board.

2. Ceiling and floor

White aluminum honeycomb ceiling (lined with insulation board).

Indoor and outdoor platform floor: outdoor ecological wood, non-slip and corrosion-resistant.

Furniture and functional modules

1. Bunk beds

Upper single bed + Double bed on the lower bunk, maximizing space utilization

Multifunctional cabinet

Integrated electric control cabinet, air conditioning inlet and outlet, bar, dining table, storage cabinet

2. Sanitary unit

Independent bathroom: toilet, shower, water supply control, drainage system, electric water heater

⚡ Intelligence and water and electricity system

3. Electric control

Folding and lifting of front and rear platforms (electric control), convenient storage and expansion.

Lighting system.

Indoor and outdoor LED lighting, energy-saving and high brightness.

Water and power supply.

Shore power access + built-in fresh water tank & gray water tank, worry-free water and electricity.

THE 35FOOT BOAT HOUSE OPERATION AND SAFETY

⚠️ Operation precautions

1. Inspection before sailing

Hull status: Check the fiberglass pontoon for cracks and joint sealing.

Power system: Confirm that the engine, propeller, and steering gear are operating normally and that there is sufficient fuel.

Safety equipment: Equipped with 6-8 life jackets, fire extinguishers, life rafts, GPS navigation and emergency signal equipment.

2. Navigation safety regulations

Load control: Total load ≤ design upper limit, reasonable distribution of cabin load.

Weather warning: Stop sailing when the waves are high to avoid strong wind and waves.

Night navigation: Turn on the navigation lights, and the deck lighting is fully covered to prevent people from falling.

3. Mooring and fixing

Anchoring selection: Select the anchor according to the water depth, and double anchor fixing to enhance stability.

Floating bridge protection: Install anti-collision fenders to avoid damage from dock collision.

Power management: Turn off non-essential electrical appliances and disconnect the external power supply.

4. Use of living cabin

Ventilation and moisture-proof: Turn on the cabin ventilation system to prevent furniture from getting moldy.

Wastewater treatment: Discharge the black water tank according to regulations to protect the water environment.

Fire prevention measures: The kitchen area is equipped with a smoke alarm, and open flames are prohibited without supervision.

️ Safety repair and maintenance

1. Regular maintenance plan

Hull inspection: Check the surface scratches of the fiberglass floating bridge every month, and repair them in time to prevent leakage.

Power system: Change the engine oil every 50 hours, and check the drive shaft and propeller every 100 hours.

Electrical system: Check the circuit waterproofness, battery power and inverter function every quarter.

2. Deep cleaning and care

Floating bridge cleaning: Rinse salt stains with fresh water, and wax the fiberglass surface every six months to prevent ultraviolet aging.

Cleaning of living cabin: Use mildew inhibitor to wipe the furniture, ventilate and dehumidify to keep dry.

Pipeline maintenance: Clean the water and sewage pipes every month to prevent blockage.

3. Key protective measures

Anti-corrosion treatment: Apply anti-rust grease to metal parts (anchor chain, hinges) every quarter.

Sealing upgrade: Replace hatch and porthole sealing strips every year to ensure waterproofness.

Structural inspection: Professionally inspect the pontoon connection and the load-bearing structure of the living cabin every 2 years.

4. Emergency response

Hull damage: Enable emergency drainage pump, go to the nearest shore or contact rescue.

Fire risk: Use fire extinguishers to put out the initial fire and quickly evacuate people to the life raft.

Power failure: Anchor the hull, start the backup power supply to send a distress signal.